Four reasons for regular cleaning of waste gas treatment equipment
There are four reasons why the waste gas treatment equipment of Jiangmen environmental protection equipment needs to be cleaned regularly
The first reason is that the temperature in the pipeline of the waste gas treatment equipment drops, the humidity is too high, and the water vapor condenses, which makes the dust easy to adhere. Affect the function and aging of equipment.
The second reason is that the wind speed of some waste gas treatment equipment decreases due to air leakage or the increase of resistance of single component.
The third reason is that the exhaust hood of the waste gas treatment equipment is inhaled
The dust concentration in the air is too high, so the waste gas treatment equipment needs to be punctual.
The fourth reason is that the horizontal pipe section of waste gas treatment equipment system is too long, or the curvature radius of elbow is too small. If the finishing is not punctual, it will affect the waste gas treatment.
To sum up, the timing waste gas treatment equipment can not only make the equipment work normally, but also prolong the equipment life.
Source: Jiangmen environmental protection equipment http://www.hongtaihonda.com
-
10-09
How to maintain environmental protection equipment in Jiangmen
1. The user shall carry out the concrete foundation construction according to the basic data provided by our company; the equipment should be installed on the concrete foundation more than 100 mm above the ground; 2. The supporting pipes and valves shall be separately supported and shall not be fixed on the tower equipment; 3. Attention shall be paid to the protection of the equipment during installation, so as not to damage the machine body and exposed parts. When the tower flange is connected
-
10-09
Ten maintenance details of spray tower of Jiangmen Guoqi environmental protection waste gas treatment equipment
Exhaust tower, in the type of exhaust tower, is one of the exhaust towers with long service life. It can deal with almost all mixed gases, so far it is a very practical and cheap product in the treatment of mixed waste gas. It is widely used in chemical industry, light industry, printing and dyeing, medicine, pharmacy, steel, machinery manufacturing, electronics, electroplating, painting, paint and other industries. It mainly deals with tail gas such as sulfuric acid, nitric acid and hydrofurani
-
10-09
Common points for attention in installation of waste gas and wastewater treatment equipment in Jiangmen
1. The user shall carry out the concrete foundation construction, and the installation surface of the foundation shall be on the same horizontal plane, and the allowable error shall not be greater than 5mm. The exhaust pipe of purification tower can be fixed by derrick type, and the foot is fixed with embedded steel plate by welding or embedded bolt. Therefore, the purification tower can not be fixed in general. The matching FRP fan is generally designed as steel frame vibration damping pedestal
-
10-09
Analysis of waste gas treatment equipment including those five factors
Waste gas treatment equipment is also known as waste gas purification equipment. Waste gas treatment refers to the pretreatment of the waste gas produced by industrial sites and factory workshops before discharge, so as to meet the national standards for external emission of waste gas. Today we Jiangmen environmental protection equipment home for you to introduce the analysis of waste gas treatment equipment including which five factors. General waste gas treatment includes organic waste gas tre